How to use the mulch calculator
- Add each bed. Use a rectangle for straight beds, a circle for tree rings, or type the area if you know it.
- Choose the mulch type. Rubber mulch switches to the smaller bag size it is usually sold in.
- Enter the depth you want. 3 in is right for most wood mulch beds.
- If there is old mulch, enter its depth so you only buy enough to bring it up to the target.
- Choose your bag size, usually 2 cu ft at US home centers.
- Add a bag price and a bulk price per yard, plus any delivery fee, to see which is cheaper.
The formula
Depth to add = target depth − existing depth
Volume (cu ft) = area × depth to add (in) ÷ 12 × (1 + extra %)
Cubic yards = cu ft ÷ 27
Bags = round up( cu ft ÷ bag size )
Bulk order = cubic yards rounded up to the next ½ yd One cubic yard is 27 cu ft, or 13.5 bags of 2 cu ft. At 3 in deep, a cubic yard covers 108 sq ft; at 2 in, 162 sq ft.
Bulk mulch is normally sold in half- or whole-yard steps, so the bulk order is rounded up to the next half yard.
Worked examples
Front bed plus a tree ring at 3 in
- Bed 20 × 4 ft = 80 sq ft. Tree ring 6 ft across = π × 3² = 28.3 sq ft. Total 108.3 sq ft.
- Volume: 108.3 × 3 ÷ 12 = 27.1 cu ft, + 5% = 28.4 cu ft (1.05 cu yd).
- Bags: 28.4 ÷ 2 = 14.2, so 15 bags.
Buy 15 bags of 2 cu ft, or 1.5 yards bulk.
Refreshing 300 sq ft of beds from 1 in to 3 in
- Depth to add: 3 − 1 = 2 in.
- Volume: 300 × 2 ÷ 12 = 50 cu ft, + 5% = 52.5 cu ft (1.94 cu yd).
- Bags: 27 at $4.50 = $121.50. Bulk: 2 yd at $38 + $60 delivery = $136.
Bags are cheaper here, and you do not need to clear space for a bulk delivery.
How far a bag or a yard goes
| Depth | 2 cu ft bag covers | 1 cu yd covers |
|---|---|---|
| 1 in | 24 sq ft | 324 sq ft |
| 2 in | 12 sq ft | 162 sq ft |
| 3 in | 8 sq ft | 108 sq ft |
| 4 in | 6 sq ft | 81 sq ft |
Assumptions and limits
- Beds are measured flat. On slopes, mulch spreads further down the slope, so add 5–10% extra.
- Bag volume is the cubic feet printed on the bag. Mulch settles a little in the bag and after spreading.
- Bulk orders are rounded up to half yards. Some suppliers sell only whole yards or have a minimum delivery.
Common mistakes to avoid
Piling mulch against trunks
Keep mulch 2–3 in away from tree trunks and plant stems. "Mulch volcanoes" keep the bark wet and invite rot, rodents and insects.
Going too deep
More than about 4 in can stop water and air reaching the roots. For an annual refresh, 1–2 in on top of existing mulch is usually enough.
Mixing up cubic feet and cubic yards
A cubic yard is 27 cubic feet. Ordering "50 yards" when you meant 50 cubic feet would be 27 times too much.
Frequently asked questions
How many bags of mulch do I need?
Multiply the bed area in square feet by the depth in inches and divide by 12 to get cubic feet. Then divide by the bag size. For 100 sq ft at 3 in, that is 25 cu ft, or 13 bags of 2 cu ft.
How many bags of mulch are in a yard?
13.5 bags of 2 cu ft, 9 bags of 3 cu ft, or 18 bags of 1.5 cu ft.
How much area does a yard of mulch cover?
About 162 sq ft at 2 in deep, 108 sq ft at 3 in, and 81 sq ft at 4 in.
Is bulk mulch cheaper than bags?
Per yard, bulk is usually cheaper, often by a lot. A delivery fee can wipe out the saving on small jobs. Enter both prices above to compare for your project.
How much rubber mulch do I need?
The volume math is the same as wood mulch: area × depth in inches ÷ 12 = cubic feet. Rubber mulch is often sold in 0.8 cu ft bags, so 100 sq ft at 2 in (16.7 cu ft) needs 21 bags. For playgrounds, the depth must match the equipment's fall height. Follow the CPSC Public Playground Safety Handbook and the manufacturer's certified depth.
How deep should mulch be?
2–4 in. Use 3 in for new beds, 2–3 in around trees (kept off the trunk), and 1–2 in to refresh existing mulch.
Formulas covered by automated tests · Last reviewed · How we calculate