Gravel Calculator

Calculate how much gravel, pea gravel or crushed stone you need for paths, garden beds, shed pads and patios, in tons, cubic yards and bags. Add several areas, choose the stone, and see the cost.

Units

Example values shown. Replace them with yours.

Areas to cover
Area 1
Shape
Gravel

Paths and beds: 2–3 in. Patios and shed pads: 4 in. Driveways: use the driveway calculator.

Choose a material to estimate weight (tons), or "Volume only".

A planning value. Your supplier's weight per yard is best.

5–10% for loose decorative gravel; 15–20% for a compacted base.

Price (optional)
Priced by

Before you buy

  • Bulk gravel is usually cheaper than bags once you need more than about half a cubic yard.
  • Put landscape fabric under decorative gravel to keep weeds down. Add edging so the stone stays in place.
  • Stone weight varies by quarry and moisture. Suppliers sell by their own scale weight, so ask for their weight per yard.

How to use the gravel calculator

  1. Add each area as a rectangle, circle or triangle, or type the area if you already know it.
  2. Enter the depth in inches. 2–3 in suits paths and beds; 4 in suits pads and patio bases.
  3. Choose the material. Each has a typical weight per cubic yard, which you can replace with your supplier's figure.
  4. Keep 10% extra for spreading and settling, or use 15–20% for a base you will compact.
  5. Optionally add the price per ton, per yard or per bag.

The formula

Volume (cu ft) = area (sq ft) × depth (in) ÷ 12
Cubic yards    = cu ft ÷ 27
Tons           = cubic yards × tons per cubic yard     (≈ 1.4 for gravel)
Bags           = cu ft ÷ 0.5                          (≈ 50 lb bags)

Quarries and landscape yards sell gravel by weight (tons) or loose volume (cubic yards). The calculator gives both, using a typical weight for each stone type. Gravel weighs about 1.3–1.5 tons per cubic yard, depending on the rock and its moisture.

Extra is added to the volume before converting to tons, so every figure includes it.

Worked examples

20 × 10 ft shed pad, 3 in of crushed stone

  1. Volume: 200 sq ft × 3 ÷ 12 = 50 cu ft (1.85 cu yd).
  2. +10%: 55 cu ft = 2.04 cu yd.
  3. Weight: 2.04 × 1.4 = 2.85 tons.

Order about 3 tons, or 110 bags if you buy bags.

40 ft garden path, 3 ft wide, 2 in of pea gravel

  1. Area: 40 × 3 = 120 sq ft.
  2. Volume: 120 × 2 ÷ 12 = 20 cu ft, + 10% = 22 cu ft (0.81 cu yd).
  3. Weight: 0.81 × 1.4 = 1.14 tons.

About 1.1 tons bulk, or 44 bags of 0.5 cu ft.

How to calculate pea gravel

Pea gravel is calculated exactly like any other gravel. Only its weight per yard differs, and suppliers usually quote about 1.4 tons per cubic yard for it. Choose Pea gravel in the calculator, or enter your supplier's figure.

1. Measure the area: length × width, or add several areas. 2. Multiply by the depth in inches and divide by 12 to get cubic feet. 3. Divide by 27 for cubic yards. 4. Multiply by the weight per yard for tons, or divide the cubic feet by 0.5 for bags.

Example: a 12 × 10 ft sitting area, 3 in deep, is 120 × 3 ÷ 12 = 30 cu ft. Add 10% and you get 33 cu ft = 1.22 cu yd. At 1.4 tons per yard that is about 1.71 tons, or 66 bags of 0.5 cu ft.

Pea gravel is round, so it rolls underfoot and migrates. Use edging, and keep it to 2–3 in on paths. For playgrounds, follow the CPSC Public Playground Safety Handbook for the depth required for your equipment's fall height.

Common gravel types and uses

MaterialTypical weightGood for
#57 crushed stone (3/4 in)≈ 1.4 t/yd³Drainage, driveway middle layer, under pavers (open-graded)
Crusher run / dense-grade (3/4 in minus)≈ 1.5 t/yd³Compacted bases, driveway tops, shed pads
Pea gravel (3/8 in round)≈ 1.4 t/yd³Paths, play areas, patios (shifts underfoot)
River rock (1–3 in)≈ 1.35 t/yd³Decorative beds, dry creek beds, drainage
Decomposed granite≈ 1.35 t/yd³Paths and patios that pack firm
#3 / #4 base stone (1.5–2.5 in)≈ 1.4 t/yd³Bottom layer of driveways on soft ground

Typical published ranges. Material names and gradations vary by region and quarry, so ask your supplier for their weight per yard.

Assumptions and limits

  • Depths are the finished depth you want. Use 15–20% extra for material that will be compacted.
  • Weights are typical loose densities; suppliers sell by their own scale weight.
  • Bags are the common 0.5 cu ft (about 50 lb) size sold at home centers.

Common mistakes to avoid

Ordering cubic yards when you mean tons

A ton of gravel is only about 0.7 cubic yards. Check which unit your supplier quotes before you order.

Spreading decorative gravel too deep

More than 2–3 in of round gravel is hard to walk on and push a wheelbarrow through. Deeper layers are for drainage and bases.

Skipping fabric and edging

Without landscape fabric and an edge restraint, gravel sinks into the soil and spreads into lawns. That makes the depth you paid for disappear.

Frequently asked questions

How much area does a ton of gravel cover?

At 1.4 tons per cubic yard, a ton is about 19 cu ft. That covers about 115 sq ft at 2 in deep, 77 sq ft at 3 in, or 58 sq ft at 4 in.

How many tons are in a cubic yard of gravel?

Usually 1.3–1.5 tons, about 1.4 for most crushed stone and pea gravel. Wet or very dense material can be heavier.

How many bags of gravel equal a ton?

Roughly 40 bags of 0.5 cu ft (about 50 lb each). Bulk is usually much cheaper once you need more than half a yard.

What gravel is best under pavers?

A compacted dense-grade base (crusher run) is traditional. Many installers now use open-graded #57 stone for drainage. Use the paver calculator for the whole base, sand and paver list.

How much pea gravel do I need?

Multiply the area in square feet by the depth in inches and divide by 324 to get cubic yards, then multiply by about 1.4 for tons. For example, 120 sq ft at 3 in is 1.11 cu yd, or 1.22 cu yd with 10% extra, which is about 1.7 tons or 66 bags. Use the calculator for several areas at once.

Is this calculator suitable for a driveway?

For a simple top-up, yes. For a new driveway with base, middle and top layers, use the gravel driveway calculator. It handles each layer and counts truckloads.

Formulas covered by automated tests · Last reviewed · How we calculate