Concrete Block Calculator

Calculate how many concrete blocks (CMU or "cinder blocks") and bags of mortar you need for a wall. Works course by course, subtracts doors and windows, and adds extra for breakage and cuts.

Units

Example values shown. Replace them with yours.

Wall size

For several walls, add their lengths together.

Block

Block width (4, 6, 8, 12 in) does not change the count, only the face size does.

A "16 in" block is really 15-5/8 in.

Standard US joint: 3/8 in. Actual size + joint = nominal size.

Rule of thumb: about 3 bags per 100 blocks.

Prices (optional)

Before you buy

  • Courses are rounded up, so the finished wall can be slightly taller than you entered. Adjust the height or plan a cap course.
  • Corners, ends and openings often use special units (corner, bullnose, half and lintel blocks). Ask your supplier when you order.
  • Retaining walls and load-bearing walls need a proper footing, and often rebar and grouted cores. Check local code or an engineer before you build.
  • Mortar yield depends on joint thickness and how much falls during laying. Buy one or two extra bags.

How to use the concrete block calculator

  1. Enter the wall length and height. For several walls, add their lengths together.
  2. Enter the total area of any doors or windows in the wall.
  3. Choose the block face size. Standard US blocks (8 × 8 × 16, 6 × 8 × 16, 12 × 8 × 16) all have the same 8 × 16 in face, so width does not change the count.
  4. Keep 5% extra for breakage, or raise it for a wall with many corners and openings.
  5. Optionally add prices for blocks and mortar.

The formula

Courses          = round up( wall height ÷ 8 in )
Blocks / course  = wall length ÷ 16 in   (rounded up to a half block)
Blocks           = courses × blocks per course − openings × 1.125
With extra       = round up( blocks × (1 + extra %) )
Mortar bags      ≈ blocks ÷ 33          (80 lb mortar mix)

Block sizes are nominal: a 16 × 8 in face is really 15-5/8 × 7-5/8 in plus a 3/8 in mortar joint. One block therefore covers 0.889 sq ft of wall, which is 1.125 blocks per sq ft.

Counting by courses, rather than area alone, reflects how walls are built. A partial course still needs a full row of blocks, which is why the finished height may be slightly taller than you entered.

Worked examples

20 ft garden wall, 4 ft high

  1. Courses: 48 in ÷ 8 = 6.
  2. Blocks per course: 240 in ÷ 16 = 15.
  3. Blocks: 6 × 15 = 90, + 5% = 94.5, so 95 blocks.
  4. Mortar: 90 ÷ 33 = 2.7, so 3 bags.

Buy 95 blocks and 3 bags of mortar mix.

30 ft wall, 6 ft high, with a 3 × 4 ft window

  1. Courses: 72 ÷ 8 = 9. Blocks per course: 360 ÷ 16 = 22.5.
  2. Gross: 9 × 22.5 = 202.5 blocks.
  3. Window: 12 sq ft × 1.125 = 13.5 blocks, which leaves 189.
  4. +5%: 198.45, so 199 blocks. Mortar: 189 ÷ 33 = 5.7, so 6 bags.

Buy 199 blocks and 6 bags of mortar, and a lintel for the window opening.

Assumptions and limits

  • Standard running-bond layout with 3/8 in mortar joints.
  • Openings are subtracted by area. Lintels, bond beams and special units (corner, bullnose, half and sash blocks) are ordered separately.
  • Mortar yield of about 33 blocks per 80 lb bag is a common rule of thumb (about 3 bags per 100 blocks). Actual use depends on joint thickness and technique.
  • Grout or concrete fill for reinforced cores is not included. Ask your supplier or engineer for core-fill volumes.

Common mistakes to avoid

Using the actual block size instead of nominal

Dividing by 15-5/8 in instead of 16 in over-counts. The 3/8 in joint is part of every block's footprint, so always use nominal sizes.

Building tall or retaining walls without engineering

Retaining walls and walls over about 4 ft carry real loads and usually need a footing, rebar, grouted cores and a permit.

Forgetting the footing

Block walls need a level concrete footing. Use the slab calculator or the cubic yard calculator to size it.

Frequently asked questions

How many concrete blocks are in a square foot?

1.125 standard 8 × 16 in blocks per square foot of wall, or 112.5 per 100 sq ft, before waste.

How many blocks do I need for a 10 × 10 wall?

10 ft high is 15 courses, and 10 ft long is 7.5 blocks per course, so 112.5, which rounds up to 113. With 5% extra, buy 119 blocks.

How much mortar per block?

About 3 bags of 80 lb mortar mix per 100 blocks, or roughly 33 blocks per bag. Thicker joints and dropped mortar use more.

What is the difference between a cinder block and a concrete block?

Older "cinder" blocks used coal cinders as aggregate. Nearly all blocks sold today are concrete masonry units (CMU) made with sand and gravel. People use both names for the same product.

Does block width change how many I need?

No. 4, 6, 8, 10 and 12 in wide blocks all share the 8 × 16 in face, so the count is the same. Width affects weight, strength, price and how much core fill is needed.

Formulas covered by automated tests · Last reviewed · How we calculate