How to use the concrete slab calculator
- Enter each slab's length, width and thickness. Add more slabs for a patio and its walkway, for example. They are totalled into one order.
- Keep the default 10% extra unless your base is very flat and well compacted, then 5% may be enough.
- If a slab has a thicker, footing-style edge, tick Thickened edge on that slab and enter its width and the extra depth below the slab.
- Tick Estimate rebar for the number of 20 ft bars for a grid spacing you have already chosen. This is a quantity, not a reinforcement design.
- For a cost estimate, open Cost estimate. Choose ready-mix or bags, then enter your own quotes: price per yard or per bag, delivery and short-load fees, rebar, other materials, and labor per square foot. Materials, delivery and labor are shown separately, with the total cost per square foot.
The formula
Volume (cu ft) = length × width × thickness (in) ÷ 12
Edge (cu ft) = perimeter × edge width × extra depth − 4 corner overlaps
Cubic yards = (slab + edge) × (1 + waste %) ÷ 27
Ready-mix order = cubic yards rounded up to the next ¼ yd
Bags = round up( cu ft ÷ bag yield ) One cubic yard is 27 cubic feet (3 × 3 × 3 ft). Ready-mix is ordered by the cubic yard, usually in quarter-yard steps.
Bag counts use published yields: about 0.30 cu ft for a 40 lb bag, 0.45 for 60 lb and 0.60 for 80 lb. That is about 45 bags of 80 lb mix per cubic yard. Bags are always rounded up.
Worked examples
12 × 10 ft patio, 4 in thick
- Volume: 12 × 10 × 4 ÷ 12 = 40 cu ft.
- +10%: 44 cu ft ÷ 27 = 1.63 cu yd.
- Ready-mix order: 1.75 cu yd.
- Or bags: 44 ÷ 0.6 = 73.3, so 74 bags of 80 lb mix (about 5,900 lb to mix by hand).
Order 1.75 yards of ready-mix. At this size, a truck is far easier than 74 bags.
Same slab as a shed base with a thickened edge and rebar
- Edge 12 in wide and 8 in deeper: 44 ft perimeter × 1 ft × 0.667 ft − 4 corners = 26.7 cu ft.
- Total: 40 + 26.7 = 66.7 cu ft, +10% = 73.3 cu ft = 2.72 cu yd, so order 2.75 cu yd.
- Rebar at 18 in each way, 3 in from the edges: 7 + 8 bars = 156.5 ft, +10% for laps, so 9 bars of 20 ft.
Order 2.75 yards and 9 bars of rebar.
How thick should a slab be?
| Use | Typical thickness |
|---|---|
| Walkways, patios, shed floors | 4 in |
| Hot tub pad | 4–6 in (check the manufacturer) |
| Driveways and garage floors | 5–6 in |
| Heavy equipment or RV parking | 6–8 in, engineered |
Local codes, soil and loads may require more. These are common residential practice, not engineering advice.
Assumptions and limits
- The slab is a flat rectangle of even thickness. For circles or odd shapes, use the cubic yard calculator, which handles several shapes.
- Extra covers an uneven base, form bulge, spillage and what stays in the truck or mixer. 5–10% is normal.
- Bag yields are from Quikrete data sheets and are close for other US brands, but check your bag.
- Rebar is a simple two-way grid with 10% for laps. Slabs that need engineering should follow the engineer's schedule.
Common mistakes to avoid
Measuring thickness at one corner
Check the depth in several spots after the base is graded. A base that is half an inch low over a large slab adds a lot of concrete.
Ordering exactly the calculated amount
Running short is worse than having a little left over. A second truck costs a delivery fee and leaves a weak cold joint. Order with 5–10% extra.
Planning to mix 100+ bags by hand
An 80 lb bag mixes about 0.6 cu ft. Two cubic yards is around 90 bags, more than 3.5 tons to lift and mix, and the first batches may set before the last are placed.
Frequently asked questions
How many bags of concrete for a 10 × 10 slab?
At 4 in thick, 10 × 10 ft is 33.3 cu ft. With 10% extra that is 36.7 cu ft, or 62 bags of 80 lb mix (0.6 cu ft each), or 82 bags of 60 lb.
How many 80 lb bags are in a yard of concrete?
About 45, because 27 cu ft ÷ 0.6 cu ft per bag = 45. For 60 lb bags it is 60, and for 40 lb bags 90.
When should I order ready-mix instead of bags?
Above about 1 cubic yard, ready-mix usually wins on cost, strength and effort. Many plants have minimum orders or charge a short-load fee for small orders. Ask about this when you call.
Do I need rebar or wire mesh in a patio slab?
Not always. Many 4 in patios use fibers or wire mesh, or rely on control joints alone. Rebar helps with cracking and loads, and is often required for garage slabs and on poor soil. Follow local code.
How do I estimate the cost of a concrete slab?
Work out the cubic yards (or bags), then multiply by your local price. Add any delivery or short-load fee, rebar or mesh, forms and base gravel, and labor, which is often quoted per square foot of slab. The calculator does this from the prices you enter. We do not show average prices, because concrete and labor prices vary widely by region and change often. Get two or three local quotes.
How much does a yard of concrete weigh?
About 4,000 lb (2 tons) per cubic yard of normal-weight concrete. Keep that in mind for trailers and pickup beds.
Formulas covered by automated tests · Last reviewed · How we calculate