Almost every material estimate starts with one number: area in square feet. Get it wrong and every box, bag and ton that follows is wrong too. The good news is that any space, however odd, can be measured with three shapes and a tape measure.
What you need
- A 25 ft tape measure, or a laser measure for large rooms
- Paper and pencil. Sketch the space before you measure it.
- Optional: a helper to hold the end of the tape on long runs
Step 1: Sketch the space
Draw a rough outline. It doesn’t need to be to scale, but every wall, jog and bump-out should be on it. Then split the outline into rectangles, plus a triangle or circle where you have to. Most rooms split into one to three rectangles.
Step 2: Measure each shape
Measure wall to wall at floor level, in feet and inches. Write each measurement on the sketch. Measure in two places on long walls; old houses are rarely square, and you should use the larger number.
| Shape | Measure | Area formula |
|---|---|---|
| Rectangle / square | length and width | length × width |
| Triangle | base, and height at a right angle to the base | ½ × base × height |
| Circle | diameter (straight across) | 3.1416 × (diameter ÷ 2)² |
Step 3: Convert inches the easy way
Calculators need decimal feet, not “12 ft 7 in.” Divide the inches by 12 and add them to the feet: 12 ft 7 in = 12 + 7/12 = 12.58 ft. Our calculators have separate ft and in boxes, so you can type exactly what’s on the tape.
Common conversions: 3 in = 0.25 ft · 6 in = 0.5 ft · 9 in = 0.75 ft.
Worked example: an L-shaped kitchen
The kitchen is 14 ft × 10 ft with a 6 ft × 5 ft breakfast nook off one side.
- Rectangle A: 14 × 10 = 140 sq ft
- Rectangle B: 6 × 5 = 30 sq ft
- Total: 170 sq ft
If a 4 × 2.5 ft island sits in the middle and you won’t tile under it, subtract 10 sq ft, leaving 160 sq ft.
Worked example: a curved garden bed
For a kidney-shaped bed, picture it as a rectangle plus two half-circles at the ends. Or walk it with a measuring wheel and treat it as a rectangle of the same average length and width. For mulch and gravel a 5–10% error is covered by your waste allowance anyway.
What to include, and what to leave out
- Closets and alcoves: include them if the flooring or tile runs into them.
- Under cabinets and islands: usually leave them out for floating floors; tile and nail-down hardwood sometimes run underneath.
- Toilets and vanities: don’t subtract them. The floor goes under the toilet, and cuts around fixtures use that tile anyway.
- Doorways: flooring usually stops under the door, at the center of the threshold. Add a small strip.
- Walls (tile, drywall): subtract large openings like doors and windows. Don’t subtract outlets.
Common mistakes
Measuring baseboard to baseboard. If the baseboard is coming off, measure wall to wall. Otherwise you’ll be short by the baseboard thickness on every side.
Multiplying feet by inches. 12 ft × 18 in is not 216 sq ft. Convert first: 12 × 1.5 = 18 sq ft.
Forgetting waste. Your measured area is what you’ll cover, not what you’ll buy. See how much extra material to buy.
Next step
Enter your shapes into the calculator for your project. Most of them let you add several areas at once:
- Tile calculator and flooring calculator for rooms
- Mulch calculator, gravel calculator and paver calculator for outdoor areas